Fujitsu Fi-6770(A)/Fi-6750S scanner version 9.21.720c driver for Win2000/XP/2003/2008/Vista/Win7 32 & 64 released on 21th July 2010.

What's new:

1.TWEI_FRAME is supported by DAT_EXTIMAGEINFO.
2.MSG_RESETALL and ICAP_PIXELTYPE are supported by TWAIN API.
Corrected Malfunctions:

1.Help file does not display in the Error Recovery Guide window even when the F1 key is pressed.
2.Automatic Page Size Detection does not work properly in some cases where both sides of a document are scanned with the below settings enabled.

¡°Current side¡±
¡°Reverse¡± (only for the one side of the document)
3.Auto Color Detection or Multi Image Output does not work properly when only one page is specified to be scanned.
4.The number of scanned pages of Error Recovery Guide does not update when a document is scanned by flatbed with Auto Color Detection is enabled.
5.When scanning with fi-6x70(A) / fi-6750S, the color of a grayscale image is not the correct color when ¡°Panel setting¡± is selected for Auto Color Detection or Dropout color.
6.Error message does not appear when a multifeed (from a paper jam, paper length overlap, etc) is detected.
7.When an application which scans a document by using memory transfer mode is in use, the image may not be generated correctly under the following conditions:.

Resolution is set to 1200dpi.
¡°Ram cache¡± or ¡°Use Both Memory¡± is selected for cache mode
Rotation is specified.
8.In scanner models fi-6x70(A) / fi-6750S, scanning operation does not start depending on the set resolution when JPEG Transfer mode is specified.
9.Scanning operation does not stop when the blank page documents are scanned from the FB with Blank Page Skip specified.
10.An application error occurs on fi-5900C when a document is scanned by specifying the following settings:

¡°Selective Edge Emphasis¡± is enabled.
¡°Current side¡± is enabled.
¡°Automatic¡± is specified for ¡°Rotation¡±.
11.The color of the scanned image is not correct when a document is scanned using the following settings:

Grayscale
0 to 2 is set for ¡°Priority¡± of Automatic Page Size Detection.
Dropout color is disabled.
12.Depending on the application, when selecting the setting file with ¡°Facing pages in one¡± specified for ¡°Scan Type¡±, nothing is displayed for the page size or the application terminates unexpectedly.
13.Only front side of a document can be scanned by ADF even when ADF / FB Automatic change is enabled:
14.The content of TWEI_CAMERA, which is acquired by executing TWEI_CAMERA DG_IMAGE / DAT_EXTIMAGEINFO / MSG_GET, is wrong in some cases.
15.When the Panel setting is specified for the Dropout color, and if MSG_GET is executed by ICAP_FILTER of TWAIN call, TWFT_NONE is informed regardless of panel setting.